Avaya 555-231-743 사용자 설명서
GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Installing the System
72
Connecting the Hospitality Adjuncts
Switch-to-INADS Connections
This connection is used for remote maintenance access to the switch from the
Initialization and Administration System (INADS). The connectivity is different for
the CMC switch than for the SCC or MCC switch.
Initialization and Administration System (INADS). The connectivity is different for
the CMC switch than for the SCC or MCC switch.
NOTE:
This INADS connection is typically installed only for installations in the
United States. Contact your local support organization to see if INADS is
required in your service area.
United States. Contact your local support organization to see if INADS is
required in your service area.
Parts List
SCC and MCC
■
The AUX connector on the SCC or MCC switch
■
One B25A 25-pair cable for cross-connections [connect the central office
(CO) trunk to the last wire pair on this cable]
(CO) trunk to the last wire pair on this cable]
■
Standard cross-connect hardware
■
One CO trunk for dedicated access.
CMC
■
The Modem connector on the switch (this port is found on the Processor
Interface Cable of the CMC hardware labeled as P2)
Interface Cable of the CMC hardware labeled as P2)
■
One M25A cable (or equivalent 25-pin straight-through cable)
■
One U.S. Robotics
®
Sportster
®
33.6K modem
■
One RJ11 modular cord
■
One 103A connecting block
■
Standard cross-connect hardware
■
One CO trunk for dedicated access.