Siemens M200D 사용자 설명서

 

Installation / connection 

 

4.1 Installation 

M200D AS-Interface Basic 
Manual, 03/2009, A5E01668085-01 

51

 

4.1.3 

Installing the protection guards 

Protection guard (accessory)    

 

CAUTION 

 

The protection guards are designed for a maximum load of 10 kg. 

 

To prevent mechanical damage to the motor starter cables and connections, you can install 

protection guards on the side and top (order no.: 3RK1911-3BA00).  
To secure the protection guards, the angled ends can be used as clamping bolts, which are 

secured in the device base by means of eccentric elements. 

 

 











1. 

Insert the eccentric elements in the locating holes on the bottom of the motor starter. 

Make sure that the holes are aligned for the protection guards. 

2. 

Push the ends of the protection guards into the holder until they engage. 

3. 

Turn the eccentric elements clockwise until the protection guard is secure.