Insignia NS-HTMW01 전단

다운로드
페이지 2
Quick Setup Guide  |  
NS-HTMW01
Portable Fan Heater
Congratulations on your purchase of this high-quality 
Insignia product. Your NS-HTMW01 represents the state of 
the art in portable fan heaters and is designed for reliable 
and trouble-free performance.
IMPORTANT SAFETY INSTRUCTIONS
1 Read all instructions before using this heater.
2 This heater is hot when in use. To avoid burns, do not let bare skin 
touch hot surfaces. Keep combustible materials, such as furniture, 
pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from 
the front of the heater and keep them away from the sides and rear.
3 Extreme caution is necessary when any heater is used by or near 
children and whenever the heater is left operating and unattended.
4 Always unplug heater when not in use.
5 Do not operate any heater with a damaged cord or plug or after 
the heater malfunctions, has been dropped or damaged in any 
manner. Discard heater, or return to authorized service facility for 
examination and/or repair.
6 Do not use outdoors.
7 This heater is not intended for use in bathrooms, laundry areas 
and similar indoor locations. Never locate heater where it may fall 
into a bathtub or other water container.
8 Do not run cord under carpeting. Do not cover cord with throw 
rugs, runners, or similar coverings. Do not route cord under 
furniture or appliances. Arrange cord away from traffic area and 
where it will not be tripped over.
9 To disconnect heater, turn controls to off, then remove plug from 
outlet.
10 Do not insert or allow foreign objects to enter any ventilation or 
exhaust opening as this may cause an electric shock or fire, or 
damage the heater.
11 To prevent a possible fire, do not block air intakes or exhaust in 
any manner. Do not use on soft surfaces, like a bed, where 
openings may become blocked.
12 A heater has hot and arcing parts inside. Do not use it in areas 
where gasoline, paint, or flammable liquids are used or stored.
13 Use this heater only as described in this manual. Any other use 
not recommended by the manufacturer may cause fire, electric 
shock, or injury to persons.
14 Always plug heaters directly into a wall outlet/receptacle. Never use 
with an extension cord or re-locatable power tap (outlet/power strip).
15) SAVE THESE INSTRUCTIONS
Before using your new product, please read these 
instructions to prevent any damage.
PACKAGE CONTENTS
•  Portable fan heater
•  Quick Start Guide
FEATURES
• Wire heating element
•  Two power settings: 750 and 1200 Watt
• Silent operation
•  Red LED power light
• Double over-heating protection
•  Removable rear cover for easy cleaning
• Dust filter
Front
Back
USING YOUR PORTABLE FAN HEATER
1  Remove the heater from the package and place on a level 
surface, such as a floor or desk top.
2  Plug the power cord into a standard 120V outlet. The red 
LED turns on.
OFF
LOW
HI
Slide the switch to the middle position.
Slide the switch to the left.
Slide the switch to the right.
Frame
LED indicator
Grill
Front stand
Switch
Filter 
cover
Back 
stand
Switch panel