Lg Electronics 19EN33SW 사용자 설명서

다운로드
페이지 35
8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Mounting on a wall
For proper ventilation, allow a clearance of 10 cm 
on each side and from the wall. Detailed 
instructions are available from your dealer, see the  
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
If you intend to mount the Monitor set to a wall, 
attach Wall mounting interface (optional parts) to 
the back of the set.
When you install the Monitor set using a wall 
mounting interface (optional parts), attach it 
carefully so it will not drop.
1
  Please, Use the screw and wall mount interface 
in accordance with VESA Standards.
2
  If you use screw longer than standard, the 
monitor might be damaged internally. 
3
  If you use improper screw, the product might be 
damaged and drop from mounted position.  In 
this case, LG Electronics is not responsible for 
it. 
4
  VESA compatible.
5
  Please use VESA standard as below.
 
y
784.8 mm (30.9 inch) and under
* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x 
                Length 10 mm
 
y
787.4 mm (31.0 inch) and above
* Please use VESA standard wall mount pad 
and screws.
10 cm
10 cm
10 cm
10 cm
 
y
Disconnect the power cord first, and then 
move or install the Monitor set. Otherwise 
electric shock may occur.
 
y
If you install the Monitor set on a ceiling or 
slanted wall, it may fall and result in severe 
injury. 
 
y
Use only an authorized LG wall mount 
and contact the local dealer or qualified 
personnel.
 
y
 Do not over tighten the screws as this may 
cause damage to the Monitor set and void 
your warranty. 
 
y
 Use only screws and wall mounts that 
meet the VESA standard. Any damages 
or injuries by misuse or using an improper 
accessory are not covered by the warranty.
 
y
Use the screws that are listed on the VESA 
standard screw specifications.
 
y
The wall mount kit will include an installation 
manual and necessary parts.
 
y
The wall mount bracket is optional. You can 
obtain additional accessories from your local 
dealer.
 
y
The length of screws may differ depending 
on the wall mount. Be sure to use the proper 
length.
 
y
For more information, refer to the 
instructions supplied with the wall mount.
CAUTION
NOTE
Model
19EN33S
VESA (A x B)
75  x 75
Standard screw
M4
Number of screws
4
Model
24EN33S
VESA (A x B)
100 x 100
Standard screw
M4
Number of screws
4
20EN33S
20EN33SS 23EN33S
22EN33S
19EN33SW