John Deere HR-BG7704-NG 사용자 설명서

 

 

 

 

 

 

 

 

        

 

Operator’s Manual

ANNUAL MAINTENANCE:

To ensure safe and efficient performance, the following components should 

be inspected and cleaned at least once per year or after any period of 

storage exceeding one month. 

Remove burner and inspect for cracks and deterioration. (Fig. 9) Clean 

venturi tubes using a pipe cleaner or venturi brush to eliminate any block-

ages caused by spiders or insects. See “Venturi Tubes”.

While burner is removed, clean interior of bottom oven by scrapping the 

sides and vacuuming. 

Inspect and replace if necessary. See “Hose and Regulator”. 

Wash with soap and water. 

Wash with soap and water. To enhance luster, coat lightly with cooking oil. 

If white oxidation spots appear, wash the outside of the housing with a mild 

soap and water solution. Rinse the surfaces thoroughly, then wipe them with 

a cloth dipped in cooking oil to restore the luster. 

For repair of paint scratches and scuffs, use a good quality HIGH 

temperature (600°F) spray paint for touch-up. 

If a problem is found with the regulator, hose, burner, or control valves, DO 

NOT

 attempt repair. See your dealer, approved service center, or contact the 

factory for repairs or replacement parts. To ensure optimum performance, 

use only original John Deere replacement parts. 

After reconnecting gas cylinder, be sure to check for leaks. See “Leak 

Testing” 

Fig. 9