Aussie Bonza 사용자 설명서

It is not necessary to remove and wash the ceramic bri-
quettes in order to keep them clean. Burning off the residue
after each cooking should be sufficient. Heavily impregnated
ceramic briquettes should be turned over so that the dirty
side faces the burners in order to burn off any residue.

· Before each use, check your Bottom Panel, Grease Tray, 

and Foil Pan. If there is excessive grease buildup, clean 
and replace. 

· Make sure Bottom Panel, Grease Tray, & Foil Pan are in 

place before each grilling session. 

· Failure to remove grease from the Foil Pan may result in  

grease dripping onto cart and/or a grease fire in tray.

·

The Foil Pan can be cleaned or replaced with a standard 

size foil pan (apprx. 5-1/2” W. x 8-1/2” L. x 1-1/8” H.) 
found at your local grocer.   

How to Clean the Grill Body
1) Remove cooking surfaces and burners before full 

cleaning. 

2) Remove excess grease and/or fat from the grill body 

with a soft plastic or wooden scraper.  Never use steel 
wool or other abrasive cleaning product on porcelain 
coated surfaces. It is not necessary to remove all the 
grease from the body.  

3) For further cleaning, use hot soapy water and a cloth, or 

nylon-bristled brush only.  Do not immerse the gas 
controls or manifold in water. 

4) When finished cleaning, replace burners and cooking 

surfaces according to Steps 9, 10, and 11 in the 
Assembly Instructions.

5) Check burner operation after reassembly.

Your Cart is manufactured using a hardwood ideally suited 
to outdoor use. To maintain its condition and appearance, 
annual application of polyurethane is recommended.  

· Follow all instructions and warnings listed on the 

polyurethane container.

· Always use a brush to apply the polyurethane, do not 

use a spray can. 

· Do not apply polyurethane to the metal grill body.
· Using the Grill Storage Cover (55) will help maintain  

the appearance of your grill and protect the finish. 

In addition to the above Care and Maintenance Instruction,
periodically check and tighten all nuts, bolts, and screws.

· Store your LP gas grill in a cool dry place .
· Disconnect LP gas cylinder from grill and store outside, in

a dry, well-ventilated area, away from any sources of heat
or ignition. Re-cap LP cylinder valve with the Safety Cap. 

· Remove burners and wrap with aluminum foil to prevent 

insects from entering the burner holes. Store wrapped 

burners on top of the cooking grids.    

· Before next use, remove aluminum foil and reinstall 

burners, Ceramic Briquettes, and grids according to Step 9,
10, and 11 of Assembly Instructions.

· Check your LP gas grill for gas leaks, deterioration, proper

assembly, and burner obstructions before using the grill
after periods of storage and/or non-use(i.e. over winter).