Omron C60K 사용자 설명서

A Host Link Unit is required to interface a computer running LSS to the PC.
Using an Optical Host Link Unit also enables the use of optical fiber cable to
connect the FIT to the PC. Wired Host Link Units are available when desired.
(Although FIT does not have optical connectors, conversion to optical fiber
cable is possible by using Converting Link Adapters.)

The FIT is an OMRON computer with specially designed software that allows
you to perform all of the operations that are available with the GPC or LSS.
Programs can also be output directly to an EPROM chip, floppy disk drive, or
printing device without any additional interface units. The FIT has an EPROM
writer and two 3.5” floppy disk drives built in.

A Peripheral Interface Unit or Host Link Unit is required to interface the
FIT to the PC. Using an Optical Host Link Unit also enables the use of optical
fiber cable to connect the FIT to the PC. Wired Host Link Units are available
when desired. (Although FIT does not have optical connectors, conversion to
optical fiber cable is possible by using Converting Link Adapters.)

Other than its applications described above, the PROM Writer can be
mounted to the PC’s CPU to write programs to EPROM chips.

Other than its applications described above, the Floppy Disk Interface Unit
can be mounted to the PC’s CPU to interface a floppy disk drive and write
programs onto floppy disks.

Other than its applications described above, the Printer Interface Unit can be
mounted to the PC’s CPU to interface a printer or X-Y plotter to print out pro-
grams in either mnemonic or ladder-diagram form.

The following table lists other manuals that may be required to program and/
or operate the K-type PCs. 

Operation Manuals and/or Operation Guides are

also provided with individual Units and are required for wiring and other
specifications.

Installation Guide

W147

Hardware specifications

Data Access Console Operation Guide

W173

Procedures for monitoring and manipulating data.

GPC Operation Manual

W84

Programming procedures for the GPC (Graphics
Programming Console)

FIT Operation Manual

W150

Programming procedures for using the FIT (Factory Intelligent
Terminal

LSS Operation Manual

W237

Programming procedures for using LSS (Ladder Support
Software)

Printer Interface Unit Operation Guide

W107

Procedures for interfacing a PC to a printer

PROM Writer Operation Guide

W155

Procedures for writing programs to EPROM chips

Floppy Disk Interface Unit Operation Guide

W119

Procedures for interfacing a PC to a floppy disk drive

Optical Remote I/O System Manual

W136

Information on building an Optical Remote I/O System to
enable remote I/O capability

Host Link System Manual

W143

Information on building a Host Link System to manage PCs
from a ‘host’ computer

K-type Analog I/O Units Operation Guide

W122

Hardware and software information on using Analog I/O Units
with the K-type PCs.