Polycom SIP 2.2.0 사용자 설명서

다운로드
페이지 254
 Configuration Files
A - 25
Dual Tone Multi-Frequency <DTMF/>
This configuration attribute is defined as follows:
Attribute
Permitted 
Values
Default
Interpretation
tone.dtmf.level
-33 to -3
-15
Level of the high frequency component of 
the DTMF digit measured in dBm0; the 
low frequency tone will be two dB lower.
tone.dtmf.onTime
positive 
integer
50
When a sequence of DTMF tones is 
played out automatically, this is the length 
of time in milliseconds the tones will be 
generated for; this is also the minimum 
time the tone will be played for when 
dialing manually (even if key press is 
shorter).
tone.dtmf.offTime
positive 
integer
50
When a sequence of DTMF tones is 
played out automatically, this is the length 
of time in milliseconds the phone will 
pause between digits; this is also the 
minimum inter-digit time when dialing 
manually.
tone.dtmf.chassis.masking
0, 1
0
If set to 1, DTMF tones will be substituted 
with a non-DTMF pacifier tone when 
dialing in hands-free mode. This prevents 
DTMF digits being broadcast to other 
surrounding telephony devices or being 
inadvertently transmitted in-band due to 
local acoustic echo.
Note: tone.dtmf.chassis.masking should 
only be enabled when tone.dtmf.viaRtp is 
disabled.
tone.dtmf.stim.pac.offHookOnly
0, 1
0
Not currently used.