Polycom SIP 2.2.0 사용자 설명서
Configuration Files
A - 55
This configuration attribute is defined as follows:
This attribute also includes:
Configuration <cfg/>
This configuration attribute is defined as follows:
Call Handling Configuration <call/>
This configuration attribute is defined as follows:
Attribute
Permitted
Values
Values
Default
Interpretation
httpd.enabled
0, 1
1
If set to 1, the HTTP server will be enabled.
Attribute
Permitted
Values
Values
Default
Interpretation
httpd.cfg.enabled
0, 1
1
If set to 1, the HTTP server configuration interface
will be enabled.
will be enabled.
httpd.cfg.port
1-65535
80
Port is 80 for HTTP servers. Care should be taken
when choosing an alternate port.
when choosing an alternate port.
Attribute
Permitted
Values
Values
Default
Interpretation
call.rejectBusyOnDnd
0, 1
1
If set to 1, reject all incoming calls with the
reason “busy” if do-not-disturb is enabled.
reason “busy” if do-not-disturb is enabled.
Note: This attribute is ignored when the line is
configured as shared. The reason being that
even though one party has turned on DND, the
other person/people sharing that line do not
necessarily want all calls to that number diverted
away.
configured as shared. The reason being that
even though one party has turned on DND, the
other person/people sharing that line do not
necessarily want all calls to that number diverted
away.
Note: If server-based DND is enabled, this
parameter is disabled.
parameter is disabled.
call.enableOnNotRegistered
0, 1
1
If set to 1, calls will be allowed when the phone is
not successfully registered, otherwise, calls will
not be permitted without a valid registration.
not successfully registered, otherwise, calls will
not be permitted without a valid registration.