Polycom SIP 2.2.0 사용자 설명서
Administrator’s Guide SoundPoint IP / SoundStation IP
3 - 8
Boot Server (continued)
1=Custom
The phone will look for the option number specified by the Boot
Server Option parameter (below), and the type specified by
the Boot Server Option Type parameter (below) in the
response received from the DHCP server. If the DHCP server
sends nothing, the phone sends out a DHCP INFORM query
and the following scenarios are possible:
Server Option parameter (below), and the type specified by
the Boot Server Option Type parameter (below) in the
response received from the DHCP server. If the DHCP server
sends nothing, the phone sends out a DHCP INFORM query
and the following scenarios are possible:
•
If no alternate DHCP server responds:
- The INFORM query process will retry and eventually time
out.
out.
- The boot server value stored in flash will be used.
•
A single alternate DHCP server responds. This is
functionally equivalent to the scenario where the primary
DHCP server responds with a valid boot server value.
functionally equivalent to the scenario where the primary
DHCP server responds with a valid boot server value.
2=Static
The phone will use the boot server configured through the
Server Menu. For more information, refer to the following
section,
Server Menu. For more information, refer to the following
section,
.
3=Custom+Option
66
66
The phone will first use the custom option if present or use
Option 66 if the custom option is not present. If the DHCP
server sends nothing, the phone sends out a DHCP INFORM
query and the following scenarios are possible:
Option 66 if the custom option is not present. If the DHCP
server sends nothing, the phone sends out a DHCP INFORM
query and the following scenarios are possible:
•
If no alternate DHCP server responds:
- The INFORM query process will retry and eventually time
out.
out.
- The boot server value stored in flash will be used.
•
A single alternate DHCP server responds.
- The phone prefers the custom option value over the
Option 66 value, but if no custom option is given, the phone
will use the Option 66 value. This is functionally equivalent
to the scenario where the primary DHCP server responds
with a valid boot server value.
Option 66 value, but if no custom option is given, the phone
will use the Option 66 value. This is functionally equivalent
to the scenario where the primary DHCP server responds
with a valid boot server value.
Boot Server Option
128 through 254
(Cannot be the
same as VLAN ID
Option)
(Cannot be the
same as VLAN ID
Option)
When the boot server parameter is set to Custom, this
parameter specifies the DHCP option number in which the
phone will look for its boot server.
parameter specifies the DHCP option number in which the
phone will look for its boot server.
Boot Server Option Type
0=IP Address,
1=String
1=String
When the Boot Server parameter is set to Custom, this
parameter specifies the type of the DHCP option in which the
phone will look for its boot server. The IP Address must specify
the boot server. The String must match one of the formats
described for Server Address in the following section,
parameter specifies the type of the DHCP option in which the
phone will look for its boot server. The IP Address must specify
the boot server. The String must match one of the formats
described for Server Address in the following section,
Name
Possible
Values
Values
Description