Toshiba 40TL900A 사용자 설명서

INSTALLING YOUR TV

6

Locate the television away from direct sunlight and 
strong lights. Soft, indirect lighting is recommended for 
comfortable viewing. Use curtains or blinds to prevent 
direct sunlight falling on the screen.

The LCD display panels are manufactured using an 
extremely high level of precision technology; however, 
sometimes some parts of the screen may be missing 
picture elements or have luminous spots. This is not a sign 
of a malfunction.

Make sure the television is located in a position where it 
cannot be pushed or hit by objects, as pressure will break 
or damage the screen. Also, please be certain that small 
items cannot be inserted into slots or openings in the case.

Sturdy tie (as short as possible)

Stand clip

Screw
 (supplied)

‘P’ Clip

Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal. 
Studies indicate that plastics may weaken and crack over time from the combination eff ects of 

chemical agents and mechanical stress (such as weight of TV). Failure to follow these instructions could 
result in serious injury and/or permanent damage to TV and TV pedestal.

Please use a wall bracket appropriate for the size 
and weight of the LCD TV.

Two people are required for installation.

• 

To install a wall-mount from another manufacturer, 

• 

use the SPACERS (supplied).

1  Unplug and remove any cables and/or other 

component connectors from the rear of the TV.

2  Carefully lay the front of the unit face down on a 

fl at, cushioned surface such as a quilt or blanket.

3  Follow the instructions provided with your 

wall bracket. Before proceeding, make sure 

the appropriate bracket(s) are attached to the 

wall and the back of the TV as described in the 

instructions provided with the wall bracket.

4  Make sure to place the spacers supplied between 

the bracket and the back of the TV.

5  Always use the screws supplied or recommended 

by the wall mount manufacturer.

1  Carefully lay the front of the unit face down on a 

fl at, cushioned surface such as a quilt or blanket. 

Leave the stand protruding over the edge of the 

surface.

  NOTE: Extreme care should always be used when 

removing the pedestal stand to avoid damage to 

the LCD panel.

2  Remove the four screws.

Four screws

3  Once you have removed all four screws holding 

the pedestal stand in place, remove the pedestal 

stand from the TV by sliding the pedestal stand 

away from the TV.

Place four spacers (supplied).

CAUTION: The diameter and length of the screws diff er 
depending on wall bracket model. Use of screws other 
than the screws specifi ed may result in internal damage 
to the TV set or cause it to fall, etc.

Screw
Wall bracket

TV back panel

M8