Uniden UBW2101 사용자 설명서

Use the goose neck mount stand to install the camera at an appropriate angle 

in a semi-permanent (desktop mount option) or permanent (wall mount option) 

location

. 

#

Lock Nut

Cord Guides

1.  Select the position for the camera 

and secure the camera stand. 

1.  Select the position for the 

mount  stand and mark out 

the mount holes.  The two wall 

screws should be spaced 1-5/8 

in. (40mm) apart. Screws and  

anchors are supplied, but if  

necessary, use an appropriate 

screw type for the mounting 

surface. 

2.  Mount the camera onto the 

bracket, but do not tighten. 

3.  Adjust the camera to the proper 

view angle. Make sure the lens 

is upright relative to your subject, 

then tighten the lock nut to secure 

the camera. 

4.  Connect the AC adapter, and 

route the cord along the guides in 

the stand.    

5.  At the LCD monitor, adjust the 

antenna to an upright position.   

DC IN 5V/1A