Albatron Technology DM-6952KF 사용자 설명서

다운로드
페이지 20
24 
 
13. REAR CONNECTORS
CT-1890
CT-1892
 
 
1.  AC in 
Connect the power source to the monitor. 
2.  VGA out 
Video signal connector Output the signal to another 
monitor. 
3.  Video out 
Composite Video output to another device. 
4.  Audio out (Left) 
Left speaker signal to another device. 
5.  Audio out (Right)  Right speaker signal to another device. 
6.  Video in 
Composite from a VCR or DVD player 
7.  Audio in (Left)  
Composite, from a VCR or DVD player. 
8.  Audio in (Right) 
Composite, from a VCR or DVD player. 
9.  Audio in (Left) 
For S-Video signal. 
10.  Audio in (Right) 
For S-Video signal. 
11.  S-Video in 
From a VCR or DVD player. 
12.  VGA1 in 
From Computer or HDTV receiver. 
13.  Audio in 
From Computer. 
14.  Antenna in 
From antenna or cable TV. 
15.  Y in 
Component Video Input, from a DVD player or HDTV 
receiver. 
16.  PbCb in 
Component Video Input from a DVD player or HDTV 
receiver. 
17.  PrCr in 
Component Video Input from a DVD player or HDTV 
receiver. 
18.  Audio in (Left) 
For Component Video Signal. 
19.  Audio in (Right) 
For Component Video Signal. 
20.  RS-232 In 
Connect the external source from PC to the monitor.
21.  RS-232 Out  
Connect the external source From monitor to other 
external source. 
 
 
 
 
 
 
 
 
 
 
 
 
CT-1890/CT-1892 REAR CONNECTORS 
25 
 
14. SIMPLE TROUBLE SHOOTING TIPS
 
 
In the rare occasion, you have might problem with your Monivision monitor, 
please look at these simple troubleshooting steps to fix the problem. 
 
PROBLEM 
TROUBLESHOOTING 
LED Not Lit 
Check your power cord connection. 
No Display on monitor 
A.  PC/MAC:Check the resolution settings of the control 
panel display settings in windows to make sure they are 
set within the perimeters of our monitors. If you are using 
a notebook computer with our monitor you need to 
change the configuration of your notebook. The output 
needs to be set to CRT. 
B.  Video:Check all of the video connections(RCA, S-
Video)for proper connection. 
C.  Television : Make sure the RF cable is connected 
properly. Check to see if the monitor is programmed via 
our auto programming function. The cable might need to 
be set to the proper carrier;STD, HRC or IRC. 
D.  Notebook:If a notebook PC is used, make sure the 
customer uses the control F function to make sure the 
external monitor function is being used. 
LED Red 
A.  Check frequency and resolution settings. 
B. Power down and re-power the monitor. Bypass
 
the 
converter box, if there is one and plug the VGA signal 
directly into the monitor. 
BYPASS THE CT CONVERTER BOX TO MAKE SURE 
THE PROBLEM IS WITH THE MONITOR. 
Display Color Error 
Check the pins of the signal cable; Make sure the monitor is 
plugged to the PC before the PC is booted up. 
Discoloration 
When operating the monitor, users may find out that putting 
the monitor in different locations or switching directions 
may render the screen’s display colors abnormal. It is 
caused by the influence of the earth’s magnetic field. After 
you push the “DEGAUSS” key, the colors should become 
normal again. 
Other Problems 
If the display becomes abnormal due to an electrostatic 
abnormal, turn the power off and wait for five seconds, then 
turn the power on again and the monitor should function 
normally.