Saunatec IG-520 BH 사용자 설명서

IG-520-BH-2  

 

5/25/07 

 

 

 

 
1. Press  “POWER”to switch on or off. 
2.“TIME”refers to control of operating time and indicates the amount of time remaining. 
    ※Once power is on, the default amount of operating time is at 45 minutes. 
    ※Press  “UP” and “DOWN”  to adjust and set time of use; pressing once will increase 

or reduce in 5 minute increments. The maximum operating time is 60 minutes. 

    ※After time of use is set, the number will flash for about three seconds. 
    ※After the set “Time” stops flashing , the number indicated will show operating time 

remaining. 

3.  “TEMP”  refers to control of the “set temperature” and also indicates the “actual 

temperature” inside sauna room. 

    ※  “°C/°F”  refer to the switching of  “°C” and “°F”. 
    ※Once the control is turned on, the indicated temperature of use defaults to 120 degrees 

F (50°C). 

    ※Press“HIGH”or“LOW”to adjust and set temperature in sauna room; pressing once 

will increase in one degree increments. The maximum set temperature is 150°F/65°C. 

    ※After temperature of use is set, the number of temperature will flash for about 5 

minutes. 

    ※After the numbers of the set temperature stop flashing, the number indicated will show 

actual temperature inside sauna room. 

4. Press “External Light” to switch on or off. 
5. Press “Internal Light” to switch on or off. 
6. Press “Bench Heater” to switch on or off.