Insignia NS-DFLMR1 전단

Quick Setup Guide  |  NS-DFLMR1

•  Macro ring flash
•  6 lens adapters (49mm, 52mm, 

55mm, 58mm, 62mm, 67mm)

•  Quick Setup Guide

•  Compatible with all DSLR 
  cameras with a flash hot-shoe
•

  Can operate remotely 

with 

  PC sync cable (not included)
•  3.75" light ring with guide 
  number of 10m at ISO 100
•  Ideal for close-up photos
•  Five illumination power levels
•  Xenon flash tube lighting

  1      

  Ring Flash and mounting slot

  Attaches to your camera lens.

  2        Power switch 

Slide to turn on or off.

  3        Charging indicator 

Brightly lit– The ring flash is ready to use.

   

 

Blinking every 1 second– Low battery.

   

 

Blinking every 3 seconds – In sleep mode. 

   

 

Off - When the flash is turned off.

     4       Flash level indicators 

Light to indicate the flash power level 

   

 

(1/16, 1/8, 1/4, 1/2 , or 1/1).

  5        Battery compartment 

Insert 4 AA alkaline or Ni MH batteries 

  

 

(not 

included)

  6        Flash level buttons 

Press + or – to select the flash power level.

     7        Test button  

Press to test your flash.        

  8        PC sync socket 

Connect a PC Sync cable (not included) to  

 

 

trigger the flash from another device or to  

 

 

locate the flash control unit away from the

  

 

camera.

     9       External power pack terminal 

For use with optional external battery pack  

 

 

module (not included). 

 

  10     Locking ring 

Secures the control unit to your camera.

  11     Lens adapters 

Allows you to mount the ring flash on your

  

 

camera 

lens.

: Batteries are not included. 

1 Slide the battery cover 
  down, then lift up to 
  open the battery 
 compartment.

Insert 4 AA alkaline or

 NiMH 

Type 

batteries.

  Make sure that the + 
  and – match what is 
  indicated in the 
 compartment.

3 Close the battery cover, 
  then slide it up until it 
  clicks into place.

NS-DFLMR1_14-0801_QSG_V1_ENG_Final.ai   1   8/19/2014   8:28:01 AM