Combi 8040 사용자 설명서

1. Buckle Harness and chest clip.

2. Loosen harness straps, (see “Harness Use And Adjustment” section).

3. From back of car seat unhook both harness loops from 

metal harness plate (fig. b).

4. From front of car seat, pull harness straps out through infant 

insert, seat pad, and car seat shell.

5. From front of car seat, rethread harness straps through infant insert, 

desired harness strap slots of seat pad, and seat back.

Make sure harness straps are not twisted 
and are threaded through matching slot of 
infant insert, seat pad and seat back.

6. From back of car seat, route shoulder straps

between plastic seat and metal rod, then 
re-attach harness adjustment loops to metal 
harness plate (fig. c). 

Check that loops are completely in slots of metal 
harness plate and under tabs on both sides.

8040 (EN) 122904.qxd  12/29/04  9:17 PM  Page 41