Combi 8040 사용자 설명서

To Remove Seat Pad:

1. Remove shoulder harness.

2. Pull down on corners of pad behind handle 

adjustment buttons to remove pins from slots.

3. Pull pad off top of car seat back.

4. Pull pad out from seat in front of red stroller latch

button to unsnap pins from seat.

5. Pull bottom of pad gently away from car seat 

bottom pulling out tabs under corners.

To Launder Pad:

1. Machine wash separately in cold water - delicate 

cycle, no bleach, and drip dry.

To Reassemble Seat Pad:

Reverse above steps for replacing seat pad and 
harness system.

Surface wash only with mild soap and damp cloth.  

If harness straps are frayed or heavily soiled, they 
MUST be replaced.

Wipe with mild solution of soap and water. Avoid 
wetting labels.

Never use “household detergents”: they can 
weaken plastic.

Rinse buckle with warm water. DO NOT use

household detergents. Never lubricate buckle.

8040 (EN) 122904.qxd  12/29/04  9:17 PM  Page 55