Britax Baby Accessories 사용자 설명서
35
Care and Maintenance
34
Care and Maintenance
Cleaning the Cover, Belly pad & Head Support Pillow
• HAND WASH, using cold water and mild soap.
• LINE DRY, to prevent shrinkage.
•
DO NOT:
Bleach, machine wash, machine dry, or iron.
Cleaning the Shell & Harness
• BRUSH AWAY LOOSE DEBRIS, using a soft bristled brush.
• SPONGE CLEAN, using warm water and mild soap.
• TOWEL DRY
•
DO NOT:
Use solvents, abrasive cleaners, or bleach. Do not
machine wash, machine dry, or disassemble the harness.
Cleaning the Harness Adjuster
WARNING:
Periodically check the adjuster area to be sure it is clean and free
of food, coins, dirt, and other objects. If debris is present, it must be
removed to prevent interference with the adjuster mechanism.
removed to prevent interference with the adjuster mechanism.
• BRUSH AWAY LOOSE DEBRIS, using a soft bristled brush.
• SPONGE CLEAN, using warm water and mild soap.
• TOWEL DRY
•
DO NOT:
Use solvents, abrasive cleaners, or disassemble the
harness.
Cover Removal
1
Unhook attachment loops.
2
Loosen harness completely.
3
From the bottom of the carrier, unhook both harness straps from
the yoke.
4
From the top of the carrier, pull each harness strap through the
upper harness slot, head support pillow and cover slot to the top
of the carrier.
5
Unfasten buckle.
6
Pull the harness straps, buckle tongues, and chest clip through the
slots in the cover.
7
Remove buckle and belly pad.
8
Remove cover and head support pillow from the carrier.
WARNING:
•
Do not take harness apart or completely remove from carrier. It is
unnecessary and dangerous to do so.
unnecessary and dangerous to do so.
•
Never remove the buckle tongues from the harness. They cannot be
reattached after removal.
reattached after removal.
Refitting the Cover
To refit the cover, reverse Cover Removal directions. Make sure that
the harness is not twisted.
P2410_R01i.qxd 11/1/2004 10:53 AM Page 36