Canon MF5650 사용자 설명서

T

roub

le

shoot

in

g

The following messages are displayed in the LCD when the machine performs a function or if it 
encounters an error. 

This section describes the general messages and those related to copy and print functions. For the 
messages related to fax functions, see Chapter 7, "Troubleshooting," in the Facsimile Guide. 

CHECK DOCUMENT

Cause 1

There is a paper jam in the ADF.

Remedy

Remove the document you are trying to copy in the ADF. (See "Removing Jammed Paper from the 
ADF," on p. 9-6.)
Make sure that the document is not too long or too short. (See "Document Requirements," on 
p. 3-1.)
Then reset the machine by opening the front cover and then closing it.

Cause 2

The ADF roller rotates without feeding documents.

Remedy

Fan the edge that will feed into the machine first, then tap the edge of multiple page documents on a 
flat surface to even the stack.

CHECK PAPER SIZE

Cause

The size of the paper in the cassette or multi-purpose feeder is different from that of the paper 
specified in <PAPER SETTINGS> of the Menu.

Remedy

Load the correct paper size or change <PAPER SIZE> in <PAPER SETTINGS> of the Menu. (See 
"Loading Paper," on p. 2-3, or "Specifying the Paper Size," on p. 2-8.)
Then reset the machine by opening the front cover and then closing it.

CHECK PRINTER

Cause

A problem has occurred in the printer.

Remedy

Reset the machine by opening the front cover and then closing it. If the message persists, unplug 
the machine from the power supply and contact your local authorised Canon dealer or the Canon 
help line.

CHECK PRINTER COVER

Cause

The front cover is not closed completely.

Remedy

Check the front cover, and make sure that it is completely closed.