Canon MF5650 사용자 설명서

T

roub

le

shoot

in

g

The Alarm indicator comes on.

Does the machine feed paper correctly, or is there paper in the cassette or multi-purpose feeder?

Clear the paper jam, or load paper in the cassette or multi-purpose feeder. (For instructions on 
clearing paper jam, see "Clearing Jams," on p. 9-1. For instructions on loading paper, see "Loading 
Paper," on p. 2-3.)

If the machine has no paper jam, or paper is loaded in the cassette or multi-purpose feeder, unplug 
the machine and wait approximately 3 minutes to 5 minutes, then plug it in again. If the problem is 
fixed, the Alarm indicator will turn off, and the LCD will return to the standby mode. If the Alarm 
indicator remains flash, unplug the machine, and contact your local authorised Canon dealer or the 
Canon help line.

Printout does not match paper size.

Is the paper stack loaded and aligned correctly in the cassette, or is paper loaded in the 
multi-purpose feeder correctly?

Make sure the paper is loaded and aligned correctly in the cassette or the paper is loaded correctly 
in the multi-purpose feeder. (See "Loading Paper," on p. 2-3.)

The machine will not scan a document.

Did you connect the power cord to the machine just now?

Wait for a while. After connecting the power cord, the machine cannot scan documents immediately. 

Is the document loaded correctly?

Remove the document, stack it if necessary, and load it in the ADF correctly. (See "Loading 
Documents in the ADF," on p. 3-3.)

Make sure the ADF is closed.

Is the USB cable connected securely?

Check that the USB cable is connected securely to the machine and your computer. Disconnect the 
USB cable, and reconnect it correctly after a while.