OKI C830 사용자 설명서
Menu functions - C830 > 56
Storage Setup
Power Setup
Language Setup
P
RINT
S
TATISTICS
M
ENU
This menu is only accessible to System Administrators. In order to gain access to this
menu, follow the instructions in
,
but hold down the Menu button instead of the Enter button.
This menu is in ENGLISH only (default settings in bold type).
This menu is in ENGLISH only (default settings in bold type).
ITEM
SETTINGS
EXPLANATION
Enable initialisation
Yes/No
ITEM
SETTINGS
EXPLANATION
Peak Power Control
Normal/low
Power Save
Enable
Disable
Disable
Sets Enable/Disable of Power Save Mode.
USB Host Power
Off/On
ITEM
SETTINGS
EXPLANATION
Language initialize
Execute
Initialises the message file loaded in FLASH.
When you press the Enter button, the following
message, requesting confirmation, will appear,
Are You Sure?
Yes
No
If NO is selected, you will be returned to the source
menu.
The procedure for clearing the disk will start immediately
after the menu and rebooting.
When you press the Enter button, the following
message, requesting confirmation, will appear,
Are You Sure?
Yes
No
If NO is selected, you will be returned to the source
menu.
The procedure for clearing the disk will start immediately
after the menu and rebooting.
ITEM
SETTINGS
EXPLANATION
Enter Password
XXXX
Enters a password to enter Print Statistics menu.
The default value is "0000".
The password for entry to Print Statistics is different
from the password for entry to Functions-Admin Setup.
"Print Statistics" category is not shown when Print
Statistics function is not supported.
The default value is "0000".
The password for entry to Print Statistics is different
from the password for entry to Functions-Admin Setup.
"Print Statistics" category is not shown when Print
Statistics function is not supported.
Usage Report
Enable
/
Disable
Enables/Disables the printing of the Usage Report.
When changing a setting value, the printer is rebooted.
When changing a setting value, the printer is rebooted.
Group Counter
Enable/Disable
Specifies if the Group counter is displayed in the Usage
Report Print.
Enable: Displayed,
Disable: Not displayed.
Conditions for display:
Enable must be selected in Functions/Print Statistics/
Usage Report.
Report Print.
Enable: Displayed,
Disable: Not displayed.
Conditions for display:
Enable must be selected in Functions/Print Statistics/
Usage Report.