OKI 430dn 사용자 설명서

Troubleshooting > 76

Paper Jams occur frequently. 
Multiple sheets of paper are 
fed at the same time. 

The printer is tilted.

Place the paper on a stable 
and flat surface.

Paper is too thick or too thin. 
Paper is moist, folded, 
creased or warped. 

Use paper suitable for the 
printer. Avoid storing paper in 
areas of excessive 
temperature and humidity. 
Store paper in protective 
wrapping

Paper is not aligned.

Align the paper edges to the 
paper guides.

Only one sheet of paper is 
loaded in the Paper tray or 
Manual Feed/Multi Purpose 
tray.

Load several sheets of paper.

Sheets of paper is added to 
the existing paper stock in the 
Paper tray or Manual Feed/
Multi Purpose tray.

Remove existing sheets of 
paper from the tray and add 
the new sheets to them, 
ensuring alignment and then 
load the tray.

Postcards, envelopes, label 
sheets or transparencies are 
loaded in the Paper tray.

Postcards or envelopes are 
placed in the wrong 
orientation.

You cannot print using the 
Paper tray. Load postcards, 
envelopes, label sheets or 
transparencies in the Manual 
Feed tray or Multi Purpose 
tray.

Check and load in the correct 
orientation.

Paper is not fed into the 
printer.

Improper setting is selected 
for Paper Source in the 
printer driver.

Select the correct paper 
source from the Source drop 
down menu.

The printer menu setting is 
incorrect.

Set the size of the paper in 
the Setup Menu of the printer.

Printing does not resume after 
removing jammed paper.

Printing does not resume only 
by removing paper jam.

Open and close the top cover.