Maytag RCS10DA 사용자 설명서
©2004 Maytag Services
16023293 Rev. 0
A–5
© 2004 Amana Appliances
Amana, Iowa 52204
Part No.12804405
Revised 10/04
Revised 10/04
F
or full product documentation visit:
www.amanacommercial.com/wavelink
™
Quick Start Reference Guide
Refer to Product Safety Manual for Safety Statements
Complete Owner’s Manual available online
Can I change an option?
Options such as single or double pad programming, beep volume, and
maximum cooking time can be changed to suit individual preferences.
maximum cooking time can be changed to suit individual preferences.
To change options:
1.
Open oven door.
• If door is closed or RESET pad is pressed before programming is complete,
• If door is closed or RESET pad is pressed before programming is complete,
changes are discarded and microwave exits programming mode.
2.
Press and hold pad 2 for approximately 5 seconds.
• This begins options mode.
• Microwave will beep and
• This begins options mode.
• Microwave will beep and
0P:
displays.
3.
Press number pad that controls option to be changed.
• See table below for options.
• Current option will display.
• See table below for options.
• Current option will display.
4.
Press number pad again to change the option.
• Each time pad is pressed, option will change.
• Match code displayed with code for desired option.
• Each time pad is pressed, option will change.
• Match code displayed with code for desired option.
5.
Press START pad to save changes.
• To change additional options, repeat steps 3 and 4.
• Changes appear after door is closed or STOP/RESET pad is pressed.
• To change additional options, repeat steps 3 and 4.
• Changes appear after door is closed or STOP/RESET pad is pressed.
Numbered Pads
Display
Options (Factory Settings in Bold)
1
End of Cycle Beep
OP:10
OP:11
OP:12
3 second beep.
Continuous beep until door is opened.
5 beep bursts until door is opened.
2
Speaker Volume
OP:20
OP:21
OP:22
OP:23
Eliminates beep.
Sets volume to low.
Sets volume to medium.
Sets volume to high.
3
Key Beep
OP:30
OP:31
Prevents beep when pad is pressed.
Allows beep when pad is pressed.
4
Keyboard Enable
Window
OP:40
OP:41
OP:42
OP:43
15 seconds after oven door is opened, keyboard disabled.
30 seconds after oven door is opened, keyboard disabled.
1 minute after oven door is opened, keyboard disabled.
2 minutes after oven door is opened, keyboard disabled.
5
Add Time During
Heating
OP:50
OP:51
Prevents adding heating time while oven is heating.
Allows heating time to be changed while oven is heating when a memory pad
is pressed.
is pressed.
6
Reset Door Open
OP:60
OP:61
Allows oven to resume heating time countdown after door is opened during
cycle.
cycle.
Cancels heating time count down after door is opened during cycle.
7
(some models)
Maximum Heating Time
OP:70
OP:71
Allows 60 minutes of heating time (some models).
Allows 10 minutes of heating time.
8
Manual Operation
OP:80
OP:81
Allows use of preprogrammed pads only.
Allows use of manual time entry and preprogrammed pads.
9
(some models)
Double Digit Operation
OP:90
OP:91
Allows 10 (0-9) preprogrammed pads.
Allows 100 (00-99) preprogrammed pads.
0
Clean Filter Message
OP:00
OP:01
OP:02
OP:03
Do not display message.
Display message for 24 hours every 7 days.
Display message for 24 hours every 30 days.
Display message for 24 hours every 90 days.
No metal pans
DO NOT power spray
?