Maytag W10306244A 사용자 설명서

Observe all governing codes and ordinances.

■

A 120 Volt, 60 Hz, AC only, 15- or 20-amp electrical supply 
with a fuse or circuit breaker.

■

A time-delay fuse or time-delay circuit breaker.

■

A separate circuit serving only this microwave oven.

The Clock is a 12-hour (12:00-11:59) clock, with A.M. and P.M. 
Touch CLOCK, enter time, then touch CLOCK or the Start control.

Timer can be used independently during any cooking program. 
Touch the Timer control, enter time, then touch the Timer control or 
the Start control.

Activate to avoid unintended start. Touch and hold the Cancel 
control for about 3 seconds until 2 tones sound and padlock icon 
appears in the display. Repeat to unlock control.

Vent Timer, Light Timer, Filter Reset, Sound On/Off, Scroll Speed, 
Demo Mode and Language (on some models - English or French) 
may be changed.

Various speeds, ranging from high to low, and off. Comes on 
automatically as cooling fan during any cook function.

Vent Timer (on some models): Set vent fan to run for exactly 
30 minutes, or to run for only 30 minutes more (off after 
30 minutes). The vent fan may be turned off at any time using the 
Vent Fan control. Touch the Options or Setup control to reach the 
“Vent Fan” submenu, and select the setting.

Set the cooktop light to turn on and off at certain times. Touch 
Options or Setup control to reach the “Light Timer” submenu, and 
set the Light On Time and Light Off Time in hours and minutes with 
A.M. or P.M.

Reset the filter status after replacing and/or cleaning the filters. 
Touch Options or Setup control to reach the “Filter Reset” 
submenu and activate reset. See “Microwave Oven Care” section. 

Programming tones and signals. Programming tones may be 
turned off, or all tones (including end-of-function signals) may be 
turned off. Touch the Options or Setup control to reach the “Sound 
On/Off” submenu, and turn tones off or on.

Scroll speed of the text may be adjusted. Touch the Options or 
Setup control to reach the “Scroll Speed” submenu, and select the 
scroll speed. Touch the Start control to set speed.

Activate to practice using the control without actually turning on 
the magnetron. Touch the Options or Setup control to reach the 
“Demo Mode” submenu, and activate or deactivate Demo Mode.

Use only for 2-level cooking. To avoid damage to the microwave 
oven, always remove rack after 2-level cooking. To avoid damage 
to the microwave oven due to soil buildup, clean rack supports 
often.

Turntable may be turned off (on some models) for manual cooking 
only. This is helpful when cooking with plates that are bigger than 
the turntable, or when cooking with plates that are side by side. 
Turntable cannot be turned off during preset or sensor (on some 
models) functions.

■  

For all cord connected appliances:
The microwave oven must be grounded. In the event of 
an electrical short circuit, grounding reduces the risk of 
electric shock by providing an escape wire for the electric 
current. The microwave oven is equipped with a cord 
having a grounding wire with a grounding plug. The plug 
must be plugged into an outlet that is properly installed 
and grounded.

WARNING: 

Improper use of the grounding plug can 

result in a risk of electric shock. Consult a qualified 
electrician or serviceman if the grounding instructions are 
not completely understood, or if doubt exists as to whether 
the microwave oven is properly grounded. 

Do not use an extension cord. If the power supply cord is 
too short, have a qualified electrician or serviceman install 
an outlet near the microwave oven.

This device complies with Part 18 of the FCC Rules.