Uniden BC92XLT 사용자 설명서
43
Special Features
The scanner sets itself to program mode after you
store a frequency.
store a frequency.
Program Band Select Mode
You can use this mode to define the search range
used during a chain search in each search bank. To
set the scanner to program band select mode, press
Func and PSrc. SRCH appears. Then select a
used during a chain search in each search bank. To
set the scanner to program band select mode, press
Func and PSrc. SRCH appears. Then select a
search bank.
When you select the search bank, the lower limit
and upper limit frequency assigned in the search
bank alternate on the display.
and upper limit frequency assigned in the search
bank alternate on the display.
To select another search bank, press Func + PSrc
or Func + to increase the search bank number
or Func + to decrease it. Hold down Func + or
Func + for about 1 second to quickly move
through the search bank numbers.
or Func + to increase the search bank number
or Func + to decrease it. Hold down Func + or
Func + for about 1 second to quickly move
through the search bank numbers.
After choosing the search bank, follow these steps
to set the lower limit and upper limit frequency.
to set the lower limit and upper limit frequency.
1. Enter the lower limit frequency by using the 0-9
and . keys.
2. Press E to select the lower limit frequency.
3. Enter the upper limit frequency by using the 0-9
3. Enter the upper limit frequency by using the 0-9
and
keys.
4. Press E to select the upper limit frequency.
Direct Entry Search
You can use direct entry search to search up or
down from the currently displayed frequency.
down from the currently displayed frequency.
1. If the scanner is scanning or searching, press
Hold.
BC92XLT Paper OM.fm Page 43 Tuesday, August 24, 2004 3:56 PM