Goodman Mfg 10.3 EER 사용자 설명서

2 www.goodmanmfg.com 

SS-GPCC

PCC

Packaged Revisions
Air Conditioner

090

90,000 BTU/h

3 208-230/3/60

120

120,000 BTU/h

4 460/3/60

5

6

1, 2, 3

4

Two-stage cool / two-stage heat thermostat with subbase, 
manual changeover, fan-on or auto. Note: A variety of 
thermostat confi gurations can be used on this equipment 
based on the application needs. For example, our CHTS36-
60 can be used if two-stage cooling and single-stage 
heating is desired.

Kit consists of four ½” shackles that are used to lift the 
equipment into position on a roof, etc. The shackles are 
attached to the mounting holes in the base rails. Wire or strap 
material along with fi eld-supplied spreader bars are employed 
to complete the lifting assembly (see rigging detail).

Liquid temperature- (or pressure-) operated solid-state 
control that varies the speed of one of the condenser fans. 
Low ambient control reduces fan motor RPM as liquid 
temperature (or pressure) decreases.  Caution: If control 
is used below 50 °F, accumulators should be added to the 
equipment to avoid slugging of the compressors.

Full perimeter curb for equipment in the down discharge 
application. Curb includes provisions for duct attachment 
prior to setting unit. Curb is shipped knocked down with all 
necessary hardware and gasket material.

Manual damper is fi xed position type for 0% to 25% fresh air. 
Motorized damper is a fi eld-adjustable mechanical damper for 
0% to 25% fresh air. Damper automatically closes when blower 
stops.

Fully modulating, enthalpy-controlled economizers 
shipped with major components pre-assembled. Plug 
assembly on equipment and economizer provides easy 
foolproof wiring.

The unit is shipped in the downfl ow (vertical) duct con-
fi guration. The horizontal duct kit must be installed in 
the fi eld for horizontal duct confi guration.

Louvered panels for condenser coil protection.

Slide-in heat kit from 20kW, 30W and 40kW can be used 
in 7½- to 10-ton models.