Perlick H50IMS-R 사용자 설명서

18

Snug the screws, 

but do not tighten.

Sheet Metal Bracket

Overlay Panel

Tighten the screws.

5) Fasten the overlay panel to the door using the four M4×25 pan head screws provided. 

Snug the screws, but do not tighten. See Fig. 17.

6) Fasten the sheet metal bracket to the bottom of the door with the three T2 screws 

provided. Tighten the screws to the door. See Fig. 18.

3) Adjust the sheet metal bracket so that it is flush with the bottom of the door. See 

Fig. 15. 

4) Remove the overlay panel from the door and tighten the two M4×8 truss head screws 

securing the sheet metal bracket to the overlay panel. See Fig. 16. 

1) Fasten the sheet metal bracket to the overlay panel using the two M4×8 truss head 

screws provided. 

Snug the screws, but do not tighten. See Fig. 13.

2) Temporarily fasten the overlay panel to the door using 2 of the M4×25 pan head screws 

provided. See Fig. 14.

Sheet Metal Bracket

Door

Sheet Metal Bracket

Screws

Overlay Panel

Door

Screws

Overlay Panel

Snug the screws, 

but do not tighten.

Sheet Metal Bracket