Philips DC290/05 사용자 설명서

10

Note

The type plate is located on the bottom of the 

 

•

main unit.

 

1

  Connect the AC power cord to the wall 

outlet.

Set time and date
1

  In standby mode, press and hold SET 

TIME/PROG for 2 seconds.

[24 HR] begins to blink.

 

»

2

  Press OK/

 to select the 12/24 hour 

format.

3

  Press SET TIME/PROG to confirm.

The hour digits begin to blink.

 

»

4

  Press  /  to set the hour.

5

  Press SET TIME/PROG to confirm.

The minute digits begin to blink.

 

»

6

  Repeat steps 4-5 to set the minute, year, 

month, and day. 

Tip

In 12 hour format, [MONTH--DAY] is 

 

•

displayed.

in 24 hour format, [DAY--MONTH] is 

 

•

displayed.

1

  Open the battery compartment.

2

  Insert 2 x R6/UM-3/AA size batteries 

with correct polarity (+/-) as indicated.

3

  Close the battery compartment.

Prepare the remote control

Caution

Risk of explosion! Keep batteries away from 

 

•

heat, sunshine or fire. Never discard batteries

in fire.

For first-time use: 

1

  Remove the protective tab to activate the 

remote control battery.

2

  Open the battery compartment.

3

  Insert one lithium CR2025 battery with 

correct polarity (+/-) as indicated.

4

  Close the battery compartment.

Note

Before you press any function button on the 

 

•

remote control, first select the correct source

with the remote control instead of the main 

unit.

Connect power

Caution

Risk of product damage! Ensure that the power 

 

•

voltage corresponds to the voltage printed on 

the back or underside of the apparatus.

Risk of electric shock! When you unplug the 

 

•

AC power cord, always pull the plug from the 

socket. Never pull the cord.

Before connecting the AC power cord, ensure 

 

•

you have completed all other connections.

EN

DC290_05_UM_V1.2_EN.indd   10

8/6/2010   2:58:44 PM