Philips AJB3552/12 사용자 설명서
10
English
Note
•
To remove a pre-stored FM radio station,
store another station in its place.
Listen to a preset FM radio
station
Press / to select a preset number.
»
The station starts broadcast in a few
seconds.
Display RDS information
Radio Data System (RDS) is a service that
sends additional broadcast information along
with FM stations. If you listen to an FM station
with RDS signal, “RDS” is displayed.
Press INFO/MENU to display RDS information
Press INFO/MENU to display RDS information
such as PTY (program type) and station name.
Select FM radio searching
scope
Before you start to search for FM radio stations,
you can select searching scope.
1
Press INFO/MENU for over 3 seconds.
2
Press or until [Scan setting] is
displayed, then press SELECT.
3
Press or to select an option:
• [Strong stations only]: Only stations
with strong signals can be searched.
• [All stations]: Stations with both
strong and weak signals can be
searched.
4
Press SELECT to confirm.
5 Listen to FM
radio
Tune to FM radio stations
Tip
•
Position the antenna as far as possible from
TV, VCR, or other radiation source.
•
For optimal reception, fully extend and adjust
the position of the antenna.
1
Press SOURCE repeatedly to select FM
tuner.
2
Press and hold or .
»
The radio tunes to a station with
strong reception automatically.
»
To tune to a weak station, rotate
TUNING +/- until you find optimal
reception.
Store FM radio stations
automatically
1
In FM radio mode, press and hold AUTO
SCAN for 3 seconds.
»
Up to 20 FM stations with strong signal
are stored in channel 1 - 20.
»
The station stored in channel 1 starts
broadcasting.
Store FM radio stations
manually
1
Tune to an FM radio station.
2
Press AUTO SCAN.
»
The preset channel number is
displayed.
3
Press / to select a channel: 1-20.
4
Press SELECT.
»
The selected FM radio station is saved
in the channel.
5
Repeat steps 1-4 to store other stations.
EN