Zhone 6382-A1-200 사용자 설명서
Technical Specifications
6300 ADSL2+/ReachDSL Enhanced DSL CPE Family
2007/01/10 20:09:43
Dimensions
■
1.2" H x 6" W x 4.4" D (3.05cm H x 15.24cm W
x 11.8cm D)
x 11.8cm D)
Weight
■
1.5lbs (shipping weight)
Power
■
100 VAC, 50 Hz
■
110 VAC, 60 Hz
■
220VAC, 50/60 Hz
Interfaces
■
DSL Line: RJ11
■
Phone: RJ11 (with integrated phone filter)
■
Ethernet: 10/100Base T, RJ45 (1 on 6210/6211,
4 on 6382/6388)
4 on 6382/6388)
■
USB 1.1 (6381 only)
■
WiFi 802.11b/g (6388 only)
Standards Support
■
RFC 1483/2684 Multiprotocol Encapsulation
over ATM
over ATM
■
RFC 2364 PPP over ATM
■
RFC 2516 PPP over Ethernet
■
IPv4, TCP, UDP, ICMP, ARP, RARP, proxy-ARP
■
RIPv1, RIPv2
■
Static Routing
■
DHCP Server/Client/Relay
■
DNS Proxy
■
UPNP
■
Multicast: IGMP v1,v2 Snooping and Proxy
■
IEE 802.1d transparent bridging
■
Lookup table for 1K MAC Address
■
Security:
- NAPT
- Stateful Inspection Firewall
- PPP with PAP/CHAP
- 64/128/256-bit WEP Engine Encryption; PSK,
TKIP; Shared Key Authentication
- Broadcast Storm Protection
- NAPT
- Stateful Inspection Firewall
- PPP with PAP/CHAP
- 64/128/256-bit WEP Engine Encryption; PSK,
TKIP; Shared Key Authentication
- Broadcast Storm Protection
■
ATM:
- Up to 8 PVCs, UBR, CBR, VBR
- OAM F5, F4 Loopbacks
- Up to 8 PVCs, UBR, CBR, VBR
- OAM F5, F4 Loopbacks
Protocol Support
■
ANSI T1.413 (Full Rate ADSL)
■
ITU G.992.1 (DMT)
■
ITU G.992.2 (G.lite)
■
ITU G.992.3 (ADSL2)
■
ITU G.992.5 (ADSL2+)
■
ITU G.994.1 (G.hs)
■
ITU G.997.1
■
Zhone ReachDSL 2.2
Management
■
Web based User Interface
■
Firmware Upgradeable via HTTP
■
Telnet Server
■
TFTP Server and Client
■
SNMP
Bandwidth/Distance
■
Downstream Speeds up to 24 Mbps using
ADSL2+ (2.2 Mbps with ReachDSL)
ADSL2+ (2.2 Mbps with ReachDSL)
■
Upstream speeds up to 2 Mbps with ADSL2+
(2.2 Mpbs with ReachDSL)
(2.2 Mpbs with ReachDSL)
Regulatory Compliance
■
FCC Part 68
■
FCC Part 15
■
CE
■
CUL
■
CS-03
■
TUV
■
ReachDSL 2.2 Spectral Compliance:
- ANSI T1.417
- ANSI T1.413
- UK ANFP
- ETSI TR101 830-1
- Approved for all loops in Japan by the TTC
- ANSI T1.417
- ANSI T1.413
- UK ANFP
- ETSI TR101 830-1
- Approved for all loops in Japan by the TTC
Operating Requirements
■
Temperature: 32F to 104F (0C to 40C)
■
Non-operating temperature: -4F to 149F (-20C
to 65C)
to 65C)
■
Humidity: 5% to 95%, non-condensing