Philips DVP3980/75 사용자 설명서

15

A

 Press STANDBY-ON to turn on this 

unit.

B

 Turn on the TV and switch it to the 

correct video-in channel. You should see 
the blue DVD background screen.

 You may go to the lowest channel on 

your TV, then press the Channel Down 
button on your TVs remote control until 
you see the Video In channel.

 You may press 

° button repeatedly 

on your TVs remote control.

 Usually this channel is between the 

lowest and highest channels and may be 
called FRONT, A/V IN, VIDEO, etc..

 Refer to your TVs user manual on 

how to select the correct input on your 
TV.

C

 If you are using external device, (such as 

audio system or receiver), turn it on and 
select the appropriate input source for 
this unit output. Refer to the device user 
manual for detail. 

The language options are different 
depending on your country or region. It 
may not correspond to the illustrations 
shown on the user manual. 

Select this to change the language of the 
On screen display menu of this unit.
The menu language will remain once you 
have set it.

A

 Press SETUP on the remote control.

 { General Setup Page } appears.

B

 Use 

 keys to select { OSD 

Language } in the menu and press  .

C

 Use 

 keys to select a language and 

press OK to confi rm.

Note:
–  To synchronise with a Philips 
‘EasyLink’ TV, the OSD language must be 
set to { Auto (xxx) }. This is the language 
available from the Philips ‘EasyLink’ TV.
–  If a non-supported language is selected, 
the default OSD language of this unit will 
be used.

dvp3980_75_eng4_final809.indd   15

dvp3980_75_eng4_final809.indd   15

2008-02-27   10:39:45 AM

2008-02-27   10:39:45 AM