Acronis Backup & Recovery 10 Adv WS TIDLBPDES 사용자 설명서
![Acronis](https://files.manualsbrain.com/attachments/d25739ab1d394aabb072edccd531cb4626454aab/common/fit/150/50/b2880b84f19a7e2f83584d83b67e44b998a1e8639a6c32decffac69cfe72/brand_logo.gif)
제품 코드
TIDLBPDES
Any running task can put itself into the Need interaction state when it needs human interaction
such as changing media or ignoring a read error. The next state may be Stopping (if the user
chooses to stop the task) or Running (on selecting Ignore/Retry or another action, such as
Reboot, that can put the task to the Running state.)
such as changing media or ignoring a read error. The next state may be Stopping (if the user
chooses to stop the task) or Running (on selecting Ignore/Retry or another action, such as
Reboot, that can put the task to the Running state.)
Stopping
The user can stop a running task or a task that needs interaction. The task changes to the
Stopping state and then to the Idle state. A waiting task can also be stopped. In this case, since
the task is not running, "stop" means removing it from the queue .
Stopping state and then to the Idle state. A waiting task can also be stopped. In this case, since
the task is not running, "stop" means removing it from the queue .
Task state diagram
Task statuses
A task can have one of the following statuses: Error; Warning; OK.
A task status is derived from the result of the last run of the task.
Status
How it is determined
How to handle
1
Error
Last result is "Failed"
Identify the failed task -> Check the task log to find out the
reason of the failure, then do one or more of the following:
reason of the failure, then do one or more of the following:
•
Remove the reason of the failure -> [optionally] Start the
failed task manually
•
Edit the failed task to prevent its future failure
•
Edit the local plan to prevent its future failure in case a
local plan has failed
182
Copyright © Acronis, Inc., 2000-2009