Philips Streamium Wireless Music Center WAC700 사용자 설명서
39
English
Tuning to radio stations
1
Check the set is switched on or to standby
(See Basic functions, Switching on/to
standby and selecting functions,
Switching to Eco power/ on)
(See Basic functions, Switching on/to
standby and selecting functions,
Switching to Eco power/ on)
2
Press SOURCE once or more to select Radio
(on the remote control, press TUNER/AUX
once or more)
once or more)
➜
Playback screen appears. Display shows:
Radio, radio station frequency and If
programmed, a preset number
programmed, a preset number
3
Press and hold 3 or 4 until the frequency
in the display starts running
in the display starts running
➜
The radio automatically tunes to a station of
sufficient reception. Display shows searching
during automatic tuning
during automatic tuning
➜
If a station is received in stereo,
is shown
➜
When you are receiving an RDS station,
is shown
4
Repeat step 3 if necessary until you find the
desired radio station
desired radio station
●
To tune to a weak station, press 3 or 4
briefly and repeatedly until optimal reception is
found
briefly and repeatedly until optimal reception is
found
Storing preset radio stations
You can store up to 40 preset radio stations in
the memory.
the memory.
Autostore: automatic programming
Autostore automatically starts programming
radio stations from preset 1. Available stations
are programmed in the order of radio
frequencies: RDS stations followed by FM
stations. Maximum 10 RDS stations will be
stored (from Preset 01 to Preset 10).
radio stations from preset 1. Available stations
are programmed in the order of radio
frequencies: RDS stations followed by FM
stations. Maximum 10 RDS stations will be
stored (from Preset 01 to Preset 10).
●
To select Autostore radio,
a. Press MENU
b. Use the navigation controls 3 or 4 and 2 to
select
select
➜
Display shows: Autostore Please wait...
➜
After all stations are stored, the first autostore
preset station will then automatically play
Manual programming
1
Tune to your desired radio station (see Tuning
to radio stations)
to radio stations)
2
On the remote control, press Program to store
the station
➜
The station is stored in the 1st vacant preset
position. Display shows its preset number
3
Repeat steps 1-2 to store other stations
Helpful hints:
– If you store more than 40 stations, the new
station will replace the 1st preset station.
– If you store more than 40 stations, the new
station will replace the 1st preset station.
To listen to a preset station
1
Press 1 to enter the list of presets
2
Use the navigation controls 3 or 4 and 2 to
select the desired station
select the desired station
FM radio
p001-p048_WACS700_EngNEW2
9/16/2005, 09:48
39