Brother MFC-4300 사용자 설명서

      F O R   D O S   U S E R S

For more information on RPC, see the Help information in the program.

Type C:\RPCX>STMX, and then press the Enter key to make the Printer 
Status Monitor Program stay resident in your computer memory. If there are any 
changes to the printer status, it displays a message on your computer screen.

If the Printer Status Monitor program stays resident in your computer, you can 
monitor the printer status on your computer screen immediately by using the 
hot-key (Ctrl+Alt+R).

To remove the Printer Status Monitor program from your computer memory, 
type C:\RPCX>STMX/R, and then press the Enter key.

The RPC works in the environment where your Brother machine is directly 
connected to your computer. If you are using printer buffer switches that do not 
support bi-directional communication between the Brother machine and 
computer, the program works only in the PC to machine direction and cannot 
receive Brother machine status information.

The program does NOT work with Brother machines on a network.

If the RPC conflicts with some application software, exit your application 
software and then run the RPC.

The RPC may work in the DOS-compatible box screen mode of Windows

®

. 

However, we recommend that you completely exit from Windows

®

 to the DOS 

prompt before using the RPC.

The Printer Status Monitor and some other Terminate-and-Stay programs 
cannot coexist in the computer’s memory. If they don’t work properly together, 
use them one at a time. You can suspend the Printer Status monitor with any of 
the following methods or commands.

Type C:\RPCX>STMX/R, and then press the Enter key. To prevent the status 
monitor from being loaded as a TSR program, hold the space bar down while 
executing the AUTOEXEC.BAT file at DOS startup.

File

Function

Environment

Sets the Buzzer on/off, Color for Remote Print 
Console

Status Monitor

Sets the hot-key for waking-up the RPC.