Brother MFC-4300 사용자 설명서

      I N I T I A L   S E T U P

After you have assembled your machine uing the Brother StartCard, continue 
the setup by programming the rest of the initial settings.

Your MFC displays the date and time, and prints it on every fax you send.

In the event of a power failure, you may have to reset the date and time. All other 
settings remain unaffected.

Press 

,

,

,

.   

Enter the last two digits of the year, and then 
press 

. 

Enter two digits for the month and press 

 

(for example, enter 09 for September).  

Enter two digits for the day (for example, 06), 
and then press 

. 

Enter the time in 24-hour format, and then press 

 (for example, enter 15:25 

for 3:25 PM). 

Press 

. 

The LCD now will show the date and time you set whenever the MFC is in 
Standby mode.

You can store your name, fax number, and telephone number to be printed on 
all fax pages you send. (See 

Press 

,

,

,

.    

Enter your fax number (up to 20 digits), 
and then press 

. 

(You must enter a fax number to proceed.)

Enter your telephone number (up to 20 digits), 
and then press 

.

(This number appears on Cover pages.)
If your telephone number and fax number are the same, enter the same number 
again. The LCD shows your entry. 

ENTER YEAR:XX

ENTER MONTH:XX

ENTER DAY:XX

ENTER TIME:XX:XX

FAX:

TEL:

NAME: