Gravely 988100 - GR1336FX 사용자 설명서

 

GB - 10

DO NOT TIP battery beyond a 45° angle in any 
direction.

ALWAYS keep batteries out of reach of children.

Before making any inspections, repairs, etc.: 
disengage PTO, stop unit and engine, remove key, 
allow moving parts to stop.

Allow hot parts to cool.

ALWAYS block wheels, engage parking brake and 
know all jack stands are strong, secure and will hold 
weight of unit during maintenance.

An extension spring, when extended, stores energy 
and can be dangerous. Always use tools specifically 
designed for installing or removing an extension spring. 
Always compress or extend springs slowly.

ALWAYS maintain unit in safe operating condition. 
Damaged or worn out muffler can cause fire or 
explosion.

Keep hardware, especially blade attachment bolts, 
tight.

Maintain or replace safety and instruction labels, as 
necessary.

For unit storage or extended storage:

•

NEVER store with fuel in fuel tank, inside a 
building where any ignition sources are present.

•

Allow engine to cool completely.

Use only attachments or accessories designed for your 
unit and that can be used safely on your terrain.

Check attachment components frequently for wear, 
damage or deterioration. Replace with manufacturer’s 
recommended parts for safety.

To reduce fire hazard and overheating, keep equipment 
free of grass, leaves, debris or excessive lubricants.

Use extra care with grass catchers and other 
attachments. These can change the stability of the unit. 
Use only approved hitch points.

ALWAYS be aware of attachments when turning. 
ALWAYS allow adequate clearance between 
attachments, personnel, and other objects.

1. Remove the unit from shipping container.

2. Adjust tire pressure to 8 to 16 psi (55 to 110 kPa).

3. Service and connect battery. 

 

 

4. Check the adjustments outlined in 

 

.

5. Check engine oil level. See engine manual.

6. Add clean fuel to the fuel tank. See engine 

manual for type and grade.

7. Check for loose hardware.

8. Be sure that safety interlock system operates 

correctly. See 

 

9. Be sure that unit tracks straight. 

Unit must not pull sharply to the left or right when 
the steering levers are released. See 

 

 

The engine will only start with the PTO disengaged. 
Pistol grip models must have the shift lever in neutral 
for engine to start.

 

The operator presence control lever must be 
depressed to operate the PTO or traction drive. When 
the shift lever or PTO is engaged, releasing the 
operator presence control lever stops the engine. 

 

The operator presence control levers must be 
depressed to operate the PTO.  When the PTO is 
engaged, releasing the operator presence control 
levers stops the mower blades. 

 

AVOID INJURY. Read and 

understand the entire 

 

section before 

proceeding.

 

AVOID INJURY. Read and 

understand the entire 

 

section before 

proceeding.

 

SAFETY INTERLOCK SYSTEM 

FAILURE and improper operation of unit can 
result in death or serious injury. ALWAYS 
know the safety interlock system is operating 
properly. See 

 

on page 17 for testing instructions.

 

AVOID INJURY. Operate only 

when operator presence control is 
functioning correctly. See 

 

on page 17 for testing 

instructions.