Gravely 988100 - GR1336FX 사용자 설명서

GB - 16

NOTE: It may be necessary to adjust cutting height in 
steps to keep deck from binding.

The striper drags behind the deck and shapes grass as 
you mow.

Adjust the striper to match cutting height. 

Short grass (deck low): mount from bottom holes.

Tall grass (deck high): mount from top holes.

1. Shut off the unit. See Shut Off on page 13 and 

"To stop mowing."

2. Remove the key.

3. Lock both steering lever latches in neutral to 

engage the brakes.

4. Chock or block the wheels if parked on a slope.

1. Shut off the unit. See Shut Off on page 13 and 

"To stop mowing."

2. Remove the key.

3. Lock pivot bar against control levers.

4. Chock or block the wheels if parked on a slope.

To move the unit without the engine running:

1. Put the shift lever in neutral.

2. Hold steering levers in neutral and disengage 

latches. Release steering levers. The brake is 
disengaged when the steering levers are 
released.

3. Push unit to desired location.

IMPORTANT: Towing the unit will damage 
transmission.

To move the unit without the engine running:

1. Put the shift lever in neutral.

2. Push the control levers all the way forward to 

release the brakes.

3. Push unit to desired location.

IMPORTANT: Towing the unit will damage the 
transmission.

ALWAYS shut off engine, remove key and drain fuel 
when transporting unit on a truck or trailer. Use extra 
care when loading or unloading unit.

Lock both steering lever latches in neutral to engage 
the brakes, or lock pivot bar against control levers.

Secure unit chassis to transport vehicle. NEVER 
secure from rods or linkages that could be damaged.

DO NOT transport machine while engine is running.

Figure 6

OG1385

Floating Deck Cutting Heights