Panasonic DMR-EX75 사용자 설명서

다운로드
페이지 80
77
RQT8388
MPEG2 (Moving Picture Experts Group)
A standard for efficiently compressing and expanding colour video. 
MPEG2 is a compression standard used for DVD and satellite based 
digital broadcasting. This unit records programmes using MPEG2.
MPEG2 moving picture files shot with a Panasonic SD multi-camera, 
etc. can be copied to the HDD or a DVD-RAM disc. 
MP3 (MPEG Audio Layer 3)
An audio compression method that compresses audio to 
approximately one tenth of its size without any considerable loss of 
audio quality. You can play MP3 you have recorded onto CD-R and 
CD-RW.
Pan&Scan/Letterbox
In general, DVD-Video are produced with the intention that they be 
viewed on a widescreen television (16:9 aspect ratio), so images 
often don’t fit regular (4:3 aspect ratio) televisions. Two styles of 
picture, “Pan & Scan” and “Letterbox”, deal with this problem.
Pan & Scan: The sides are cut off so the picture fills 
the screen.
Letterbox: Black bands appear at the top and bottom 
of the picture so the picture itself appears 
in an aspect ratio of 16:9.
Playback control (PBC)
If a Video CD has playback control, you can select scenes and 
information with menus.
(This unit is compatible with version 2.0 and 1.1.)
Progressive/Interlace
The PAL video signal standard has 625 (or 576) interlaced (i) scan 
lines, whereas progressive scanning, called 625p (or 576p), uses 
twice the number of scan lines. For the NTSC standard, these are 
called 525i (or 480i) and 525p (or 480p) respectively.
Using progressive output, you can enjoy the high-resolution video 
recorded on media such as DVD-Video.
Your television must be compatible to enjoy progressive video.
Panasonic televisions with 625 (576)/50i · 50p, 525 (480)/60i · 60p 
input terminals are progressive compatible.
Protection
You can prevent accidental deletion by setting writing protection or 
deletion protection. 
RGB
This refers to the three primary colours of light, red (R), green (G), 
and blue (B) and also the method of producing video that uses them. 
By dividing the video signal into the three colours for transmission, 
noise is reduced for even higher quality images.
Sampling frequency
Sampling is the process of converting the heights of sound wave 
(analog signal) samples taken at set periods into digits (digital 
encoding). Sampling frequency is the number of samples taken per 
second, so larger numbers mean more faithful reproduction of the 
original sound.
Signal Quality
This is the guide for checking the aerial direction. The numbered 
values displayed do not indicate the strength of the signal, but the 
quality of the signal (the signal to noise ratio, or “S/N”). The channels 
you can receive are affected by weather conditions, seasons, time 
(day/night), region, length of the cable that is connected to the aerial, 
etc.
Thumbnail
This refers to a miniature representation of a picture used to display 
multiple pictures in the form of a list.
TIFF (Tag Image File Format)
This is a system used for compressing/decoding colour still pictures, 
a common format for storing high quality images on digital cameras 
and other devices.
1080i
In one high definition image, 1080 (1125) alternating scan lines pass 
every 1/50
th
 of a second to display an interlaced image. Because 
1080i (1125i) more than doubles current television broadcasts of 
480i (525i), the detail is much clearer and creates a more realistic 
and rich image.
720p
In one high definition image, 720 (750) scan lines pass at the same 
time every 1/50
th
 of a second to create a progressive image. Since 
progressive video does not alternate scan lines like interlace, there 
is a minimal amount of screen flicker. 
G
lo
ssa
ry
EH65.book  Page 77  Friday, September 1, 2006  9:46 AM