Barco PGWU-62L-K 사용자 설명서
36
PGWX-62L/PGWU-62L/PGWX-62L-K/PGWU-62L-K - - 2015/03/06
4. User Controls
4.1.2.6 Control Menu
Standby 5V
Switch on/off for the 5V output in standby.
Off: Default value. 5V output off in standby.
y
On: 5V output on in standby.
y
Eco network power
Switch on/off the network power to save power.
Off: Default value. Network is enable in standby and the power consumption is under 3W.
y
On: Network is not available in standby and the power consumption is under 0.5W.
y
RS232 baudrate
Select RS232 baudrate.
115200: Default value for this function.
y
9600/19200: Other options.
y
Network
View the relevant network information.
IP Address: Default value is 192.168.0.100.
y
Subnet Mask: Default value is 255.255.255.0.
y
Gateway
y
DHCP: Default value is Off, key in the IP address manually and press APPLY.
y
Apply:
y
The DHCP function must be set to “On” and press “Apply” to get the IP address from DHCP server
-
automatically.
It takes several seconds to get the IP.
It takes several seconds to get the IP.
-
In case of fail to get the IP address, please re-apply again.
-
Menu position
Shift the menu box to a position.
Center: Default value for this function.
y
Top Left
y
Top Right
y
Bottom Left
y
Bottom Right
y
Auto source
Automatic source searching.
On: Default value. Automatic source searching is enabled.
y
Off: Automatic source searching is disabled.
y
Language
Select the language to display the OSD Menu.
English
y
German
y
French
y
Spanish
y
Simplified Chinese
y
Japanese
y
Russian
y
Korean
y
Turkey
y
CONTROL
Standby 5V
RS232 baudrate
Network
Menu position
Auto source
Language
Enter
Top Left
Off
Enter
Off
Eco network power
On