Lowrance electronic HDS 8 사용자 설명서

109

Diagnostics
Displays diagnostic information on NMEA 2000 networks displays the status of 

information shared between units (UDB). From the UDB tab, you also can select a 

unit to be used as the master (primary) unit when sharing information.  To access the 

Diagnostics screen, select Diagnostics from the Network menu and press 

enTeR. 

NMEA 2000 receive/send waypoint
Turns on/off the unit’s ability to send and receive waypoints across a NMEA 2000 

network. NMEA 0183 receive waypoint

 controls the unit’s ability to receive way-

points over a NMEA 0183 network.
To turn on/off NMEA send/receive waypoint 

commands, highlight the desired NMEA send/

receive option and press 

enTeR. 

Serial Ports
Configures  communication  ports  to  send  or  receive  data  with  another  electronic 

device, like an autopilot. 
To configure serial ports:

1.   Highlight  Serial Ports on the Network menu 

and press 

enTeR.  

2.   

Select the desired setting and press 

enTeR. 

3.   Use the keypad to select the desired 

option and press 

enTeR.

4.  Highlight OK and press 

enTeR.