Epson II 사용자 설명서

If thin paper creases when you print, you can solve the problem by

using the control panel to select the Special paper type setting.

To change the paper type setting to Special, first make sure the

printer is on line. Then press the 

MANUAL 

button and hold it down

for several seconds. SP appears on the display to show that the

printer is in the Special mode.

To return to the normal setting, repeat the steps described above. (SP

disappears from the display.)
To permanently save the paper type setting, first make sure the

printer is on line. Then press 

ON LINE while 

pressing the 

MANUAL

button.

l The paper type setting returns to the saved setting 

if the FEED

light is off, no panel buttons are pushed, and no data is sent to

the printer for ten minutes.

The RESET function does not change the paper type setting.

l The FACTORY RESET function changes the paper type setting

or paper path setting to normal.

l The paper type setting is not affected by the paper size setting.

For example, even if you select the Cl0 envelope size, the

paper type setting does not change.

You cannot change the paper type setting when the 

FEED 

light

is on.