Epson II 사용자 설명서

There are five types of printer initialization (returning 

the 

printer to

a fixed set of conditions).
All of 

the 

printer’s parameters return to the default power-on

settings:

When the power is turned on.

When the power is turned off and, after at least 5 seconds, turned

on again.

When the 

CONTINUE 

button on the printer is pressed until the

display shows “INITIALIZE.”

You clear the data received and return the current SelecType Level 1

settings to the saved settings:

When the 

CONTINUE 

button is pressed and RESET appears on the

printer display,* and your software sends the RESET command

to the printer.*

You return 

the 

current SelecType Level 1 settings to the saved

settings:

When you perform the LOAD MACRO setting in the SelecType

Level 1 SYSTEM CONFIG option.

You return the current SelecType (Level 1 and Level 2) settings to the

saved settings:

When you perform 

the 

FACTORY RESET option in SelecType

Level 2.

* Some parameters may not be changed by this method. Refer to

the individual printer mode descriptions in Appendix D.