Epson II 사용자 설명서

Never remove a card while the printer is

on line, in SelecType mode, or while 

the 

printer is

resetting. If you remove a card while the-printer is in one

of these states, a REINSERT CARD message appears on

the display. An error also occurs if you remove a card

while the 

FEED 

light is on, 

even 

if 

the 

printer is off line. See

the description of card error messages in Chapter 7 for

more information.

1.

Make sure that the printer is not in one of the following

conditions:
The 

FEED 

light is flashing fast (the printer is receiving data

through the currently-selected interface). You are setting

parameters using SelecType. The display shows 

the message

RESET.

If 

the FEED 

light is on, take the printer off line and press 

FEED to

print any data remaining in the buffer.
Set the printer off line (make sure the 

ON LINE 

light is off) or turn

off the power.
Remove the card by grasping the card at the center and gently

pulling it straight out of the slot.