Epson CX5700F 매뉴얼 소개

Maintaining Your EPSON STYLUS CX5700F

4. Press the 

OK

 button. The EPSON STYLUS CX5700F runs a head cleaning 

cycle and the message 

Cleaning . . .

 appears on the display.

Caution: 
Never turn off the EPSON STYLUS CX5700F while head cleaning is in progress. You may 
damage it.

5. When the display returns to 

4.Head Cleaning

, run a nozzle check to verify 

that the print head is clean. See page 49 for details.

6. If there are still gaps or lines, or the test patterns are faint, run another 

cleaning cycle and check the nozzles again.

Note: 
If you do not see any improvement after cleaning the print head four or five times, turn off 
the EPSON STYLUS CX5700F and wait overnight. This lets any dried ink soften. Then try 
cleaning the print head again. If quality still does not improve, one of the ink cartridges may 
be old or damaged and needs to be replaced. See page 53 for details.

Caution: 
If you do not use your EPSON STYLUS CX5700F often, it is a good idea to print a few pages at 
least once a month to maintain good print quality.

You can check the approximate level of ink in your cartridges using the control 
panel.

1. Press the P

On

 button to turn on the EPSON 

STYLUS CX5700F, or press the y

Cancel/Back

 

button until you see a screen like this:

2. Press the 

Setup

 button. You see this display:

3. Press the u or d button, or press the 

2 

key on the 

numeric keypad, to display this option:

4. Press the 

OK

 button. You see a display like this:

If one or more cartridges are low on ink, you see a 
display like this:

5. Press the 

OK

 or y

Cancel/Back 

button to return to the first screen.

If you need to replace an ink cartridge, see page 53.

21:00          Y

1.Load/Eject

2.Ink Levels

C:50% M:50% Y:50

C:Ink low M:50%