Panasonic DMC-LS5 사용자 가이드

- 33 -

VQT3T39

■

(

○: Available, –: Not available, 

○

: Default setting)

○

○∗

○

○

○

–

○

–

○

○

–

○

○

–

○

○

–

–

–

–

○

–

–

–

○

–

○

○

○

–

○

–

○

○

○

○

–

–

–

–

–

–

–

○

–

–

–

–

–

–

–

–

–

○

–

○

–

–

–

–

○

○

○

○

○

○

○

○

○

○

○

○

∗

Set to 

, 

, 

 or 

 according to the subject and brightness.

 

• The flash cannot be used in Motion Picture Mode and in these Scene Modes: 

, 

, 

, 

, 

.

 

• Scene Mode flash settings are restored to default when Scene Mode is changed.

■

Approx. 0.6 m (1.97 feet) - 4.6 m (15.09 feet)

Approx. 0.6 m (1.97 feet) - 2.0 m (6.56 feet)

 

●

The flash is activated twice. Be sure to keep still until all flashing is complete. 

 

●

Shutter speeds are as follows:

 

•

, 

, 

, 

 : 1/60 - 1/2000th

 

•

,   : 1/8∗

 - 1/2000th

∗

Varies according to [Intelligent Auto] Mode, [Scene Mode] scene, etc.

 

●

The effect of Red-Eye Reduction varies depending on the subject and is affected by 
factors such as distance to the subject, whether the subject is looking at the camera 
during preliminary flash, and so on. In some cases, the effect of Red-Eye Reduction 
may be negligible.

●

Do not touch or look at the flash (→7) from close distances (i.e. a few cm).
Do not use the flash at close distances to other subjects (heat/light may damage 
subject).

 

●

Flash settings may be changed when changing Recording Mode.

 

●

Scene Mode flash settings are restored to default when Scene Mode is changed.

 

●

When [AUTO] is set in [Sensitivity], the ISO Sensitivity is automatically set in a range up 
to 800.

 

●

No pictures may be taken if these marks (e.g. 

) are flashing (flash is charging).

 

●

Insufficient light may prevent appropriate exposure or white balance.

 

●

Flash effect may not be fully achieved with high shutter speeds.

 

●

Flash charging may take time if battery is low, or if using flash repeatedly.