Ricoh SP 3300D 사용자 설명서

1.5   

<Introduction>

Place the machine on a flat and stable surface for not letting it tilt 
more than 2 mm (0.08 inches). Otherwise, it may affect the printing 
quality. 

Unpack the machine and check all the enclosed items.

Remove the tape holding the machine tightly.

Install the toner cartridge.

Load paper. (See "Loading paper" on page 5.4.)

Make sure that all the cables are connected to the machine. 

Turn the machine on. 

• When you move the machine, do not tilt or turn it upside down. 

Otherwise, the inside of the machine may be contaminated by 
toner, which can cause damage to the machine or bad printing 
quality.

• When the printer driver is in the installation process, the driver 

detects the locale information of your operating system, and 
sets the paper size for your machine. If you use the different 
Windows locale, you must change the paper size of your 
machine for matching your commonly used paper size. Open 
the printer properties to change the paper size.

The print quality is affected by atmospheric pressure, which is 
determined by the height of the machine above sea level. The following 
information will guide you on how to set your machine to the best print 
quality.

Before you set the altitude value, find the altitude where you are using 
the machine. 

Ensure that you have installed the printer driver with the provided     
supplied CD-ROM.

For Windows, from the Start menu, select Programs or All 
Programs > SP 3300 Series > Printer Settings Utility.

For MAC OS X, open the Applications folder > RNP > SP 3300 
Series > Printer Settings Utility.

Click Setting > Altitude Adjustment. Select the appropriate value 
from the dropdown list, and then click Apply. 

If your machine is connected to a network, Web Image Monitor SP 3300 
Series screen appears automatically. Click Machine Settings > Setup 
(or Machine Setup) > Altitude Adj. Select the appropriate altitude 
value, and then click Apply.

High 3

Normal

Value

High 2

High 1