Ricoh SP 3300D 사용자 설명서

Programs supplied on the CD

2.2

Before using your network print server in your network, you must set 
TCP/IP addresses for the print server. You will need your printer card’s 
MAC address, IP address, subnet mask, and gateway address. First, 
check with your network administrator for the TCP/IP addresses.

Note: The MAC address is the hardware serial number of the network 
printer card. You can check the address by printing the Network Printer 
Configuration Page. For printing the page, refer to your printer user’s 
guide.

You can set your print server’s IP address via the following methods:

• Set IP program: Go to the Using SetIP.

• Web Image Monitor SP 3300 Series: Once you have set an IP 

address for your network print server, you can use the embedded 
web server in the network printer card to change the address. Go to 
next column.

• DHCP: You can use Dynamic Host Configuration Protocol (DHCP) to 

get an IP address automatically assigned by your network 
administrator, if your network system supports this protocol.s

• BOOTP: A network-based server using the BootStrap protocol 

(BOOTP) can notify the network printer card of its assigned IP 
address each time the printer turns on, if your network system 
supports this protocol.

Note: To get an IP address from the DHCP or BOOTP server, the IP 
assignment method must be set to DHCP or BOOTP.

From the Start menu, select Programs or All Programs > SP 
3300 Series > Set IP.

The program automatically detects and displays new and 
configured print servers on your network.

Select the name of your printer and click 

. If you cannot find 

your printer name, click 

 to refresh the list.

Even with this step, if you cannot find your printer name, then 
contact Network Administrator.

Enter your network printer card’s MAC address (hardware 
address), IP address, subnet mask, default gateway, and then click 
Apply.

Click OK to confirm the settings.

Click Exit to close the SetIP program.

If you want to change your network printer IP setting, follow the below 
instruction.

Printer the machine’s network information report which includes 
your machine’s MAC address.

Open the Library folder > Printers > RFG > your printer model 
name > Set IP.

Double click the SetIPApplet.html file.

Run your web browser.

Enter your print server’s IP address in the URL field and click Go.

Click Network Settings > TCP/IP.

Select Static from IP Address Assignment Method.

Enter your print server’s TCP/IP addresses and click Apply.