Ricoh SP 3300D 사용자 설명서
Administration Tools
6.1
6
Administration Tools
This chapter explains how to configure or use the various administration
tools found in SP 3300 Series. The following information is provided:
tools found in SP 3300 Series. The following information is provided:
Maintenance using Internet Services
Enabling Internet Services
1
At a client workstation on the network, launch the Internet Browser.
2
In the URL field, enter http:// followed by the IP Address of the SP
3300 Series. Then select the [Enter] key.
3300 Series. Then select the [Enter] key.
Example: If the IP Address is 192.168.100.100, enter the following
in the URL field:
http://192.168.100.100
in the URL field:
http://192.168.100.100
Checking Printer Status
Use these instructions to check the status of SP 3300 Series, the paper
trays and consumables.
trays and consumables.
To check the status, perform these steps:
1
Enable SP 3300 Series (see “Enabling Internet Services” on
page 6.1).
page 6.1).
2
At SP 3300 Series Home Page for SP 3300 Series, select the
Information tab.
Information tab.
3
Click Print Information in the left frame.
Printing Reports
Use these instructions to print the printer’s reports or to send a test print
file to SP 3300 Series.
file to SP 3300 Series.
To print reports, perform these steps:
1
Enable SP 3300 Series (see “Enabling Internet Services” on
page 6.1).
page 6.1).
2
At SP 3300 Series Home Page for SP 3300 Series, select the
Information tab.
Information tab.
3
Click Print Information menu in the left frame. Then click the
appropriate Print link to print:
appropriate Print link to print:
Print Information
• Print Printer Configuration Page
• Print Demo Page
• Print Menu Map
• Print PCL Font List
• Print PS3 Font List
Network Information Page
• Print Network Configuration Page
Making and Changing Network Admin
Password
Password
Use these instructions to change the admin user’s password.
To make admin user’s password settings, perform these steps:
1
Enable SP 3300 Series (see “Enabling Internet Services” on
page 6.1).
page 6.1).
2
At SP 3300 Series Home Page for SP 3300 Series, select the
Maintenance tab.
Maintenance tab.
3
Click Security menu in the left frame.
4
Select the checkbox to Enable Security for using security.
5
To change the Admin User Password, in the change Admin User
Name and Password area:
Name and Password area:
Enter the New Admin Name and Old Admin Name.
Enter the New Admin Password and Old Admin Password.
6
Click the Apply button to implement any changes.
Note: Click the Undo button to cancel any changes made and return to
the previous values.
the previous values.
Upgrading Firmware
Firmware upgrades may supplied on a CD or as a download from the
internet. Use these instructions to install firmware upgrades in SP 3300
Series.
internet. Use these instructions to install firmware upgrades in SP 3300
Series.
To upgrade the firmware, perform these steps:
1
Enable SP 3300 Series (see “Enabling Internet Services” on
page 6.1).
page 6.1).
2
At SP 3300 Series Home Page for SP 3300 Series, select the
Maintenance tab.
Maintenance tab.
3
Click Firmware Upgrade in the left frame.
4
Insert the CD or download the upgrade from the internet.
5
Enter the file name and location or Browse to the location and
select the file.
select the file.
6
Click the Upgrade button.