Grizzly G1006 사용자 가이드

-14-

g1006/7 heavy duty Mill/drill

Wear safety glasses dur-

ing the entire setup pro-

cess!

this machine presents

serious injury hazards

to untrained users. read

through this entire manu-

al to become familiar with

the controls and opera-

tions before starting the

machine!

setup safety

section 3: setup

items needed for

setup

your machine was carefully packaged for safe

transportation. remove the packaging materials

from around your machine and inspect it. if you

discover the machine is damaged, please imme-

diately call Customer Service at (570) 546-9663

for advice.

save the containers and all packing materials for

possible inspection by the carrier or its agent.

Otherwise, filing a freight claim can be difficult.

When you are completely satisfied with the condi-

tion of your shipment, inventory the contents.

unpacking

inventory

the model g1006/g1007 is

a heavy machine. serious

personal injury may occur

if safe moving methods

are not used. to be safe,

get assistance and use

power equipment to move

the shipping crate and

remove the machine from

the crate.

the following is a description of the main compo-

nents shipped with your machine.

crate contents (figure 3)

Qty

drilling angle vise (not shown) ................. 1

drill Chuck .................................................. 1

r8 arbor ..................................................... 1

Feed levers with Knobs ............................. 3

plastic handwheels w/handles .................. 3

lug Wrench 23mm ..................................... 1

head Crank w/handle ................................ 1

Cap screw M10-1.5 x 25 (Fly Cutter) ......... 1

Fender Washer 10mm (Fly Cutter) ............. 1

Fly Cutter .................................................... 1

The. following. items. are. needed. to. complete. the.
setup. process. but. are. not. included. with. your.
machine.

description

Qty

•..Safety.Glasses.(for.each.person).......................1
•..Wrench.10,.12,.14,.19mm..........................1.Each
•..Hex.Wrench.2.5,.3,.4,.5mm......................1.Each

figure 3.

inventory.