JVC GR-DVP9 지침 매뉴얼

Master Page: Right-Heading0X2

The parameters (except “OFF” in ON SCREEN 
settings) are the same as in the description on 
page 38.
ON SCREEN

(Factory-preset: LCD)

OFF / LCD / LCD/TV
When set to “OFF”, the camcorder’s display 
disappears.

(Factory-preset: OFF)

OFF / AUTO / ON
When set to “AUTO”, the date/time are displayed 
in the following cases:

• When playback starts. The camcorder displays 

the date/time when scenes are recorded.

• When the date is changed during playback.

(Factory-preset: OFF)

OFF / ON

NOTE:
The date indication can also be turned on/off by 
pressing the DISPLAY Button on the remote control 
(provided). (

墌 pg. 22, 50, 59)

4

This feature lets you record still images that look like 
photographs onto a tape.

Set the VIDEO/MEMORY Switch to “VIDEO”.

Set the Power Switch to “M” while pressing down 
the Lock Button located on the switch.

Open the LCD monitor fully, or pull out the 
viewfinder fully.

Set “SNAP MODE” to the desired mode. 
(

Press SNAPSHOT.

● The “O” indication appears and a still 

image will be recorded for approx. 6 seconds, 
then the camcorder re-enters the Record-
Standby mode.

● You can perform Snapshot also during 

recording. A still image will be recorded for 
approx. 6 seconds, then the normal recording 
resumes.

● Regardless of the Power Switch position (“A” 

or “M”), Snapshot recording takes place using 
the selected Snapshot mode.

● To remove the shutter sound, refer to “BEEP” on 

GR-DVP9Asia_07Advanced.fm  Page 41  Thursday, March 6, 2003  9:26 AM